|
Taylor-Dunn
ETram People Mover Electric
Vehicle
The
E-Tram, one of the latest product solutions from
Taylor-Dunn, is designed to move personnel in an
industrial or commercial application. E-Tram, when
equipped with 9 or 12 passenger trailers, can carry
over 30 people in a single trip.
Equipped with 36 volt or
48 volt drive train, E-Tram can travel at speeds of
15 mph, while providing a range of 24 miles in a
single charge.
Low step height and
increased visibility while traveling at low speeds
in congested areas make E-Tram an ideal solution
for your personnel moving applications.
Low noise and zero
pollution accompanied with low operating and
maintenance cost makes E-Tram the most cost
effective solution when compared to its gasoline
alternatives.
E-Tram, equipped with a
roll out battery box, can provide extended range
for your application. Ideal for use in public
venues, E-Tram is one of the safest and most
economical ways to transport your customers or
employees.
|
Product Line:
Model BT2-80
Wheels: 4 wheels
Unit Weight: 1,418 lbs (643
Kg.)
Load Capacity: 3,000 lb.
Battery Type (Lead Acid): 220 amp
hours, 6 volts
System Voltage: 36 volt
Travel Distance (Unloaded): 24
miles
Energy Consumption:
264 watt/hr. per mile
Drive Axle:
Automotive type differential and
housing
Transmission:
Power traction in oil bath; 14:1
reduction
Motor: 36V @ 1,400 rpm:
DC Series wound 10 hp
Speed (Unloaded):
10.5 mph
Gradeability:
15% empty, 5% fully loaded
Tires Pneumatic:
5.70x8 load range B
Brakes:
Hydraulic disc brakes rear, hand operated
parking brake
Steering:
Automotive steering 24:1
|
Frame: All
steel unitized body, heavy duty 14 gauge
steel
Bumper: Heavy duty steel front
bumper
Suspension: Leaf springs front and
rear, with rear shock absorber
Color: Safety orange, traffic
yellow
Seats: Bench seat cushion, full
back seat foam covered with vinyl
Controller:
Solid state speed controller 400 amp 36
volt
Wiring:
Modular harness design with weather
protected connectors
Instrumentation:
Battery discharge indicator,
forward/reverse selector, key switch
Light Accessories:
Headlight, taillight
Charger:
25 amp, 36 volt built in automatic
charger
Charge Time:
8 hours for charge on batteries 80%
discharged
Input Voltage:
110 volt/220 volt, 50 Hz./60Hz.
Charging Energy Requirements:
9.9 kw hr. @ 80% efficiency
Conformance Standards:
Type E OSHA requirements 1910.178, ANSI
B56.8 requirements
|
Look for more information stay
tuned to ElectricCars.com!
|
Click this logo to go to
the Taylor-Dunn website...
|
|
|
